Discontinued Worktops

Duropal S60019 CR Crick Square Edge Worktop 4.100 X 600 X 25mm Worktop consisting of a particleboard type P2 to EN 312, decor side bonded with robust Duropal HPL according to EN 438, underside with water-repellent backing. The longitudinal edges of the worktop are machined. It is also available as a variant with a protective edge on one side.

Duropal S63028 Nero Portoro XM Square Edge Worktop 4.100 X 600 X 40mm Worktop consisting of a particleboard type P2 to EN 312, decor side bonded with robust Duropal HPL according to EN 438, underside with water-repellent backing. The longitudinal edges of the worktop are machined. It is also available as a variant with a protective edge on one side.

Duropal S64011 Deep Slate CR Square Edge Worktop 4.100 X 900 X 25mm Worktop consisting of a particleboard type P2 to EN 312, decor side bonded with robust Duropal HPL according to EN 438, underside with water-repellent backing. The longitudinal edges of the worktop are machined. It is also available as a variant with a protective edge on one side.

Duropal U12290 VV Anthracite Quadra Worktop 4.100 X 600 X 40mm Worktop consisting of a particleboard type P2 to EN 312, decor side bonded with robust Duropal HPL according to EN 438, underside with water-repellent backing. The postforming front edge of the Quadra worktop has a radius of 3 mm, the rear edge is sealed with a protective edge. It is also available as a variant with both sides profiled.

Duropal U12290 VV Anthracite Quadra Worktop 4.100 X 900 X 40mm Worktop consisting of a particleboard type P2 to EN 312, decor side bonded with robust Duropal HPL according to EN 438, underside with water-repellent backing. The postforming front edge of the Quadra worktop has a radius of 3 mm, the rear edge is sealed with a protective edge. It is also available as a variant with one side profiled.